Still Spirits Turbo 500

Still Spirits Turbo 500

Still Spirits Turbo 500

New Still Spirits “Turbo 500″ or the “T500″ Distillation Unit

Still Spirits Turbo 500 Manual
Still Spirits Turbo 500 Instructional Manual PDF 235kb Turbo 500 ‘T500′ Instructional Operational & Assembly Guide

Avaliable From
www.onestopbarshop.com.au/T500

How The Still Spirits “Turbo 500″ “T500″ works

Distillation is the process or method of seperating liquid mixtures based on the differences in the volatility of their boiling points. Distillation is a unit operation that physically seperates the blended solution, it does not a chemical reaction, but can be used to seperate chemical solutions. Commerically you would see this in the petroluem industry, with the distillation of crude oil into its various chemical compounds. You may also see distilled water, this is a high quality and purity water product which is used for special applications such as car batteries. The topic that we are going to be focusing on is the use of distillation equipment in the production of distilled alcohol, also known as a distillery.

Using the Turbo 500, we are able to use the benefits of distillation to make our own distilled water, essential oils, alcohol and many other great products. I will talk about water to begin with, as most of us have boiled water at some stage in our life, and possibly distilled it in high school science. Water has a freezing point of <0°C (state of solid – ice), boiling point of 100°C (state of liquid – water when between 0°C and 99.9°C), >100°C water will then be in a gas form known as steam. When you boil a kettle, you will see bubbles come up through the water and reach the top, releasing steam. In the Turbo 500 distillation unit, we funnel this steam through a long pipe called a reflux which is packed with special shaped cupped ceramic saddles, the gas vapour cools as it travels through the saddles and creates condensation as it drops below its boiling point (returns back to a liquid form). In the Turbo 500 we also use an arangement of special cooling apparatus to help the condensation process.

With a mixture of water and alcohol, the boiling point will be at ~78°C, as ethanol (alcohol) has a boiling point of ~78°C, the mixture will boil off the lowest boiling point substance, until all of that substance with the lower boiling point has evaporated and is exhausted. The boiling volume would then move onto the next boiling point which would be 100°C (water). One thing that should be noted that, the higher the percentage of a particular substance boiling, in this case alcohol, the higher the % in the distillate (final product) will be, as there will be a percentage of water also evaporating, diluting the final product. Higher quality stills like that of the Turbo 500 unit improves the total final % of the distillate and the yield (how much we can extract from the boiling solution).

There are three main parts to the Still Spirits Turbo 500,

  • 25L stainless steel boiler with a 2kw enclosed element
  • The reflux head unit which is made up of two important parts (1. reflux 2. condenser)

The boiler has a very powerful heating element, which does not come in contact with the liquid, for it to work optimally, we must use special ceramic beads. These beads create a surface area for the gas to build and release before building too large (helps the volume simmer rather than rapidly boil), otherwise we get large bubbles of gas called surges.

The reflux first column is the reflux, where steam from the boiler travels up, with the lowest boiling point substances traveling higher than the other substances (ie alcohol will travel higher before being cooled than water). The second stage is the condenser, whereby the steam that has passed through the ceramic saddles (discussed earlier) is then passed through to be converted in an intense cooling environment within the distillation head unit.

What is special about the Still Spirits Turbo 500?

The Still Spirits Turbo 500 reflux condenser is a little bit special, it works on the principles of ceiling temperatures, where through its intelligent design it prevents chemical substance above a certain boiling point being processed. Unlike other reflux condensers on the market the Turbo 500 works with a focus on the water flow and controlling the temperature of the water flow out. Assuming that the temperature of the water flow is stable, it is able to create a ceiling threshold temperature based on the water flow out. So effectively, If you are looking at collecting a product of a boiling point of ~78°C, water flow out would be set just to collect everything up to this temperature, then prevent any other products with a boiling point above ~78°C up the reflux and into the condenser.

This technology break through was only developed through the redesigning of the contemporary reflux, designed to make distillation easier with hassle free operation. It’s designed to set and forget as it operates until exhaustion, requiring simple initial setup with water flow and turning off once distillation is complete.

How do you make alcohol to begin with before distilling?

Alcohol is a by product of yeasts feeding on sugar in a body of water. There are other compounds made during the process, like CO2, different forms of alcohol and methanol, but we focus on the beverage alcohol produced which has the boiling point of ~78°C as discussed. This process is called ferementation and is performed in a food grade fermenter (also known as a barrel), taking depending on the ingredients used and environmental factors between 7-12 days.

Instructional Video

Still Spirits Turbo 500 – Introductional  Video by Imake

 

Still Spirits Turbo 500 – Instructional Video 1 – Mixing wash ingredients

Please note:

  • Ingredient wash has been upgraded since video production, we recommend the 6KG Still Spirits Triple Distill Production Pack
  • Mixing of wash does not require the yeast to be stirred, much easier to get the volume into a swirl vortex and sprinkle yeast on top

Still Spirits Turbo 500 – Instructional Video 2 – Assembly of T500 Still

 

Still Spirits Turbo 500 – Instructional Video 3 – Distillation of wash

Please note disclaimer at the bottom of page

It is never recommended to store or collect alcohol in plastic containers, always use glass bottles (measure jugs should be used only for measuring)

Still Spirits Turbo 500 – Instructional Video 4 – EZ Filter

 


Cost of operation

The running cost of the Turbo 500 will vary depending on the ingredients, will vary the operation time but between 4-5 hours is the general rule with a full run. At $0.13kwh off peak ($0.22kwh on peak), the unit cost a insignificant $1.30 – $2.20 in power consumption to operate, this is opposed to other forms of distillation units requiring LPG gas bottle which can be quite expensive after 5 hours of operation.

Cost of final product

This will vary depending on what you are making in terms of whiskey or liqueurs, also the varying qualities available. But working on the highest quality and most recommended blend of ingredients you are looking at approximately $10 per the bottle which is equivalent to a $60+ triple distilled commercial grade alcohol bought from your everyday liquor outlet. Higher and lower alcohol quality grades can be achieved, but there is a sliding scale quality for quantity. We stress ‘you get what you pay for’

This figure has been fully aggravated to consider all aspects of cleaning, fermenting, distilling and blending of your drink.

Looking more detailed at ingredients

The use of premium ingredients will not only increase the quality of the end product, but will increase the ease of use of the distillation products. Providing you use very high quality ingredients (like the still spirits 6kg triple distilled production pack) there is a reduced need to discard the first 50mls that is associated with other stills, as these yeasts produce one tenth of the metho and impurities during initial fermentation. Thus, any remaining impurities will be removed with the combination of the high % T500 reflux and the still spirits carbon filtration system. But it is still recommended to discard the first 50mls

It should be noted that a reflux will only increase the concentration not change quality the product is, high quality product in equals high quality out. Low quality yeasts and sugars can create compounds that produce undesired substances that have very close boiling points to the ~78°C in addition to high levels of metho ~65°C that can carry across and can fool the reading equipment used to test % of product. Spirit Hydrometers work on density and are only accurate when measuring pure spirit and water

Dimensions

Condensor without pipes -
H650 x W160 x D60mm
add approx 100mm in hieght for pipes, width will vary but allow 500mm either side

Boiler
H590 x W320 (add on 80mm for tap)

Combined weight:14kg approx.

Condensor Box
H680 x W180 x D110mm
Weight: 9kg approx.

Boiler Box
H655 x W370 x D370mm
Weight: 5kg approx.

Link to the Still Spirits Website and also click here to Download Turbo 500 Technical Manual

Recommended Associated Products:

  • Alcobase Spirit Beginner Kit (fermenting, testing and filtration equipment)
  • 6kg Still Spirits Triple Distilled Production Pack
  • 5L glass bottle with flip top
  • 1.125L spirit bottles alternative to the 700ml bottles
  • Premium Infusing Flavours (Still Spirits Classic range or the Essencia range)

PLEASE NOTE: Product quality is controlled by five critical elements;

  • Yeast and ingredients (sugars & clearing agents) – Triple Distill Turbo Yeast being the best, Classic Turbo Yeast the most Reliable, secondly the types of sugars that you feed the yeast, weather Dextrose or turbo sugars will change the yield and quality, specs can be found at the still spirits website http://www.stillspirits.com/wawcs016161/ln-turbo-yeast-system.html
  • Distillation % & purity (high percentage will not mean high purity)
  • Carbon filtration
  • Flavour blending (noting that some are food flavourings and some are infusing which will improve with age)
  • Natural aging of the spirit

DISCLAIMER

We reserve the right to change price and details without notice, graphics may differ from product as improvements/modifications are carried out on the product. This website is not affiliated with still spirits nor is it endorsed by still spirits.

Please note that in certain countries alcohol distillation may be illegal and you may require a licence. Ask for advice or contact your local Customs & Excise Department.

Please note it is illegal to use these units in Australia to product alcohol for consumption without a licence from the Australian Customs & Excise Department.

4 Responses to Still Spirits Turbo 500

  1. heylin says:

    awesome toy

  2. Chrissy says:

    loool. this is a great idea! :)

  3. Christine says:

    Has anyone used this equipment to pull lavender oil? Is there a different set of instructions to do it? I tried it last night and there is no oil, just a brownish liquid in my bottle. I thought it might “settle” through the night but there’s no oil this morning either.
    I took it to boiling and maintained it for two and one half hours to get about a gallon and a half of liquid.
    If you know a way to make lavender oil with this still please reply.
    THanks
    ch

    • turbo500_wp says:

      Hi Christine,
      The unit has been calibrated for alcohol at ~78°C,
      I believe lavender has a boiling point of ~200°C, as a result I suspect it is failing to pass from the reflux into the condenser and is merely refluxing within the column. How I would go about approaching this would be to remove the ceramics and copper saddles and experiment without the fillings (this will reduce the %). I would then redistill until desired concentration has been achieved. This will be trial and error to experiment, as there are several variable that can come into play with high temp distillation.
      I should note, you will want to clean your reflux very well immediately after use, as it can carry over elements to batches thereafter.
      hope I helped

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>